| |
Reg. 529 A, Reg. 529 B, Reg. 530, Reg. 531
STANDARD CONDITIONS FOR THE DESIGN AND
CONSTRUCTION
OF ECONOMISER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR
VESSELS
REGULATIONS FOR REGISTRATION AND INSPECTION OF ECONOMISERS
AND FEED PIPES
(a) Registration Books |
|
Registration Books shall be maintained on the lines
of Regulation 387.
|
|
| |
Reg. 529 B
STANDARD CONDITIONS FOR THE DESIGN AND
CONSTRUCTION
OF ECONOMISER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR
VESSELS
REGULATIONS FOR REGISTRATION AND INSPECTION OF ECONOMISERS
AND FEED PIPES
(b) Transfer of Memorandum of Inspection Book and Registration
Books |
| |
|
On an economiser passing from one State to another,
the Memorandum of Inspection and Registration Books
shall, on the request of the Chief Inspector of the
State to which the economiser has been transferred,
be forwarded to that Officer who shall take over their
custody and maintain them as prescribed.
|
|
| |
Reg. 530
STANDARD CONDITIONS FOR THE DESIGN AND
CONSTRUCTION
OF ECONOMISER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR
VESSELS
REGULATIONS FOR REGISTRATION AND INSPECTION OF ECONOMISERS
AND FEED PIPES
Grant of certificate |
| |
|
A certificate for the use of an economiser shall be
granted in Form XI.
|
|
| |
Reg. 531
STANDARD CONDITIONS FOR THE DESIGN AND
CONSTRUCTION
OF ECONOMISER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR
VESSELS
REGULATIONS FOR REGISTRATION AND INSPECTION OF ECONOMISERS
AND FEED PIPES
Casual visits |
| |
| a) |
The Inspector shall
note if the economiser is working satisfactorily, and
if the relief valves are correctly adjusted, if the scraper
gear is operating and if the external brickwork is free
from cracks. |
| b) |
He shall also ascertain that the maker’s instructions
for working are being strictly followed by the owner.
NOTE:- It is recommended that the feed inlet
temperature to the economiser should not be less than
100°F. to prevent sweating and consequent external
corrosion of the tube and bottom headers.
|
|
